Categories

Olaplex how to use it?

Publié le 2019-07-18

Olaplex how to use it?

Launched in the United States in November 2014, OLAPLEX is the most significant discovery of the last 10 years in the hairdressing market.
It revolutionizes the coloring, the fading, as well as all the chemical, mechanical and thermal techniques that sensitize the hair becoming
dull, dry, rough, brittle ... OLAPLEX repairs this damage.
Real dressing of the hair, Olaplex is the absolute weapon anti-breakage.
Basic principles of Olaplex:

Strictly observe the recommended dosages (do not exceed the dosages either!)
Respect the trademark protocol for technical services
Always shampoo post after staining or discolouration
Do not increase the strength of the oxidant after a service form or in wicks technique wrapped
If the hair is very sensitized, we can extend the pause time of Olaplex Bond Perfector N ° 2 of 10mn (10mn + again 10mn)
The amount of Olaplex Bond Perfector # 2 recommended may vary depending on the length and thickness of the hair.
For less than 60gr of staining, adjust the amount of Olaplex Bond to multiply # 1.
The Olaplex Bond Perfector # 2 will not be used after a permanent because it would weigh down the loops too much.
Olaplex protocols:

The essential recipe: DEEP CARE
Olaplex Deep Care is the best-selling and most popular in the United States!
Advantages :
Strengthens the hair very damaged
Consolidate the internal structure of the hair to receive a future technical service
Repairs in depth

Preparation and application:
DEEP CARE

Moisten the hair.
Dilute 15 ml of Bond Multiplier N ° 1 with 90 ml of warm water and apply to the bottle only.
Leave for 5 to 10 minutes (do not rinse)
Apply 15 ml of Bond Perfector No. 2 and mix well with a wick.
Thicker, longer hair? Do not hesitate to increase the quantity of N ° 2!
Leave on for 10 minutes to 20 minutes.
Rinse and wring the hair.
Finally, shampoo N ° 4 and care N ° 5 adapted to the nature of the hair and then rinse.

COLORING
Prepare the staining mixture with the oxidant or developer.
Add the Multiply Bond # 1 and mix:
• less than 60 gr of color * = 1 ml of Bond Multiplier N ° 1
• 60 gr of staining = 1.875 ml of Bond Multiplier No. 1 (= 1/2 dose)
• more than 60 gr of coloring = make two distinct mixtures
Example for 120 gr of total coloration:
First mixture: 60 gr of color + 1.875 ml of N ° 1
Second mixture: 60 gr of color + 1.875 ml of N ° 1
Respect the usual exposure time of the coloring and rinse.
Apply 15ml of Bond Perfector N ° 2 and mix well with wick.
Thicker, longer hair? Do not hesitate to increase the quantity of N ° 2
Leave on for 10 minutes then rinse.
Make a shampoo and a post-coloring treatment then rinse.
* without taking into account the oxidant or the developer.

DECOLORATION Wrapped Wicks
Prepare the bleaching powder mixture with the oxidant.
(Caution: do not increase the volume of oxidant in the wrapped technique)
Add the Multiply Bond # 1 and mix:
• less than 30 gr of discoloration = 1.875 ml of Bond Multiplier N ° 1 (= 1/2 dose)
• 30 to 60 gr of discoloration = 3.75 ml of Bond Multiplier N ° 1 (= 1 dose)
• more than 60 gr of discoloration = make two separate mixtures
Observe the exposure time of the discoloration and rinse.
Apply 15ml of Bond Perfector N ° 2 and mix well with wick.
Thicker, longer hair? Do not hesitate to increase the quantity of N ° 2!
Leave on for 10 minutes then rinse.
Make a shampoo and a post-fading treatment then rinse.

DECOLORATION wicks free air, sweeping or whole head
Prepare the bleaching powder mixture with the oxidant.
Depending on the powder used, a larger volume of oxidant may be used to avoid lengthening the fading time.
Add the Multiply Bond # 1 and mix:
• less than 30 gr of discoloration = 1 ml of Bond Multiplier N ° 1
• from 30 to 60 gr of decolorization = 1.875 ml of Bond Multiplier N ° 1 (= 1/2 dose)
Observe the exposure time of the discoloration and rinse.
Apply 15ml of Bond Perfector N ° 2 and mix well with wick.
Thicker, longer hair? Do not hesitate to increase the quantity of N ° 2!
Leave for 10 minutes then rinse.
Make a shampoo and a post-fading treatment then rinse.

Thiolated or unthiolated defrosting
Make a shampoo pre-form then rinse and wring.
Mix 7.5 ml of Bond Multiplier N ° 1 (= 2 doses) for 60 gr of smoothing cream, apply and leave to apply according to the usual protocol of the mark then rinse.
Apply the fixative or neutralizing shampoo according to the usual protocol of the brand, leave for 5 min then rinse.
Dilute 15 ml of Bond Multiplier N ° 1 for 90 ml of warm water in a baby bottle only and apply all over the hair evenly.
Leave for at least 5 minutes, without rinsing.
Apply 15ml of Bond Perfector N ° 2 and m

COMMENTAIRES

Aucun commentaire pour le moment.

Seuls les utilisateurs enregistrés peuvent publier des commentaires.

Compare 0